#SIEMENS SIMATIC S7 TRAINING KENYA SOFTWARE#
#SIEMENS SIMATIC S7 TRAINING KENYA SERIES#

This means that you have to choose the CPU type you are using. Usually, the first thing you would do in the STEP 7-Micro/WIN is to set up a project for your S7-200 PLC. By using the RS485 based Siemens PPI ( Point to Point Interface) you can connect to the PLC and upload a simple program within minutes: Take a look at this video to see how you can create and upload a very simple ladder logic example PLC program to a Siemens S7-200 PLC. From connecting the PLC to your computer and uploading your first PLC program shouldnвЂ™t take much time. Get started programming the Siemens S7-200 PLC can be done quite fast. From simple binary instructions and word operations to program control with master control relays (MCR) and even PID-loops.

Within those PLC programming languages, you have a variety of instructions available.

Instruction List (IL) in Siemens PLCвЂ™s called Statement List (STL).

The languages you can use with STEP 7-Micro/WIN is: You will be programming the Siemens S7-200 PLC with one of the standard PLC programming languages as described in the IEC 61131 standards.

#SIEMENS SIMATIC S7 TRAINING KENYA SOFTWARE#

The PLC programming software for the S7-200 is made to be intuitive and easy to use. The software used to program the S7 PLCвЂ™s is STEP 7-Micro/WIN. One of the biggest advantages of using a Siemens S7-200 PLC is the programming software. STEP 7-Micro/WIN 32 for PLC programming with Siemens S7-200

More about that piece of PLC programming software later in this article.ДЇirst, a little look at the various modules you can get for the S7-200 PLC system. The reason, this PLC is so easy to work with is that you use Siemens STEP 7 Micro/WIN to program the PLC. You can be programming ladder logic for Siemens S7-200 after just a quick configuring of the PLC programming environment. If you read further down this article, you will notice that this Siemens PLC is actually very easy to connect to, configure, program, and debug your programs. Because even though this relatively small PLC is the cheapest one from Siemens, and therefore has a limited amount of built-in functions, this PLC has some clear advantages over other cheap PLCвЂ™s.Д«esides being cheap, Siemens S7-200 PLC is also quite user friendly. The decision is yours, and whether or not you decide to buy something is completely up to you рџ™‚ Why Use The Siemens S7-200 PLC?ДЇirst of all, I would like to give you a few of the reasons why I think you should start PLC programming with the Siemens S7-200 PLC. I link to these products because of their quality and not because of the commission I receive. This article will explain the Siemens S7-200 PLC.Дisclosure: Some of the links in this post are affiliate links and if you go through them to make a purchase I will earn a commission.

If you are serious about learning PLC programming you should take a look at the Siemens S7-1200 Starter Kit, which comes with the latest STEP 7 Basic TIA Portal (version 13). Siemens has made a new kit for learning PLC programming.

#SIEMENS SIMATIC S7 TRAINING KENYA SERIES#

In the line of PLCs, you will also find the Siemens S7-300, Siemens s7-400, Siemens S7-1200, and the most advanced PLC system in the line Siemens S7-1500.Д®ven though the S7-200 PLC system is still the cheapest it is now the latest series of Siemens PLCs. The smallest PLC model is the Siemens S7-200 PLC. With this article, you will be ready to start configuring and programming the Siemens S7-200 PLC.ДЄs you may know, the PLC product line from Siemens is named S7 or Step 7 PLCs. The Siemens S7-200 has a limited variety of functions, but it certainly also has a lot of advantages. It is the cheapest PLC from Siemens, and it is very easy to begin programming. The Siemens S7-200 PLC is a very popular choice when you start PLC programming.

Siemens simatic s7 training kenya